Ethernet Test OMAP35x

From RidgeRun Developer Connection

Revision as of 19:24, 27 August 2010 by Dsoto (Talk | contribs)
Jump to:navigation, search

From u-boot

Using the tftp command used by the RidgeRun SDK installer we tested the Ethernet from u-boot. You have to configure a tftp server on your host.

Using NFS

After the kernel boots and loads fs. The SDK is set to use Network file system it validate the Ethernet after kernel boot

eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, irq=-)
Navigation
Toolbox