Configure u-boot environment for Hawkboard

From RidgeRun Developer Connection

Revision as of 22:44, 22 April 2010 by Cmurillo (Talk | contribs)
(diff) ← Older revision | Current revision (diff) | Newer revision → (diff)
Jump to:navigation, search

Configure your u-boot environment with the following commands: > setenv lcdconf 'mw.l 0x01c14110 0x44442222 1; mw.l 0x01c14114 0x44400000 1; mw.l 0x01c14118 0x04604404 1; md 0x01c14110' > setenv bootcmd 'run lcdconf; nboot ${kernelloadaddr} 0 ${kerneloffset}' > saveenv