20,290
edits
mNo edit summary |
|||
Line 19: | Line 19: | ||
Camera capture pipelines were tested with a Sony IMX219 CMOS (Raspberry Pi V2.1 camera) image sensor, which its Linux driver is already supported by default on Linux For Tegra kernel for the Jetson Xavier NX and Jetson Nano platforms. | Camera capture pipelines were tested with a Sony IMX219 CMOS (Raspberry Pi V2.1 camera) image sensor, which its Linux driver is already supported by default on Linux For Tegra kernel for the Jetson Xavier NX and Jetson Nano platforms. | ||
If you are interested in a higher quality camera support for the Jetson Xavier NX platform, you can take a look at the [ | If you are interested in a higher quality camera support for the Jetson Xavier NX platform, you can take a look at the [[Raspberry_Pi_HQ_camera_IMX477_Linux_driver_for_Jetson | Raspberry Pi HQ camera IMX477 Linux driver for Jetson]] wiki page for detailed information on the free Linux driver support for this camera sensor that RidgeRun offers. | ||
Using nvarguscamerasrc with a Sony IMX219 CMOS image sensor (Raspberry Pi V2.1 camera), the following operation modes are available: | Using nvarguscamerasrc with a Sony IMX219 CMOS image sensor (Raspberry Pi V2.1 camera), the following operation modes are available: | ||
Line 35: | Line 35: | ||
</pre> | </pre> | ||
The Jetson Xavier NX has the following power mode "NV Power Mode: MODE_15W_6CORE" and | The Jetson Xavier NX has the following power mode "NV Power Mode: MODE_15W_6CORE" and the jetson clocks binary was executed to set the board in maximum performance mode. | ||