Getting Started with NVIDIA Jetson Xavier NX Developer Kit
Prepare microSD Card
To boot up your Jetson Xavier NX board you will need to prepare a microSD card with a bootable image. NVIDIA provides a prebuilt image that you can download from: Jetson Xavier NX Developer Kit SD Card Image
Once downloaded the image you need to write it to your microSD by following the instructions bellow:
1. Insert the microSD card to your computer and identify the corresponding device
2. Flash the downloaded image, change /dev/sdx to your corresponding device
#Change the path if you download the image to another location unzip ~/Downloads/jetson-nx-developer-kit-sd-card-image.zip | sudo dd of=/dev/sdx bs=1M status=progress
3. Remove microSD from your computer
sudo eject /dev/sd<x>
Setup the Board
1. Insert the prepared microSD card into the slot under the Jetson Nano Module in the developer kit.
2. Connect an hdmi display
3. Connect USB keyboard and mouse
4. Connect your power supply
First Boot