i.MX8 - iMX8MEVK

Revision as of 16:53, 28 September 2018 by Gfallas (talk | contribs)



  Index  





Getting Started

On this page you are going to find all the information to start from scratch. You will find information about the board and how to configure your host machine in order to customize your own images. First, a general description about the board capabilities will be shown. Next, a description about the package content and a briefly guide about how to start the board. Finally, the required steps to build a custom image will be shown.

Key Features

The iMX8EVK has the following features:

  • Processor: i.MX 8M Quad (Based on Cortex-A53 and Cortex-M4F series)
  • Memory RAM: 3 GB LPDDR4
  • eMMC: 16 GB
  • Wireless: WiFi 802.11 a/b/g/n/ac MIMO 2x2 + Bluetooth 4.1
  • Network: Gigabit Ethernet
  • GPU: Vivante GC7000 Lite
  • Display specification:
  1. HDMI (4K@60fps)
  2. 4-lane MIPI-DSI mini-SAS (1080p@60fps)
  • Camera support:
  1. 2x 4-lane MIPI-CSI mini-SAS (1080p@60fps)
  • Audio: 3.5 mm Audio Jack
  • Interfaces:
  1. USB 3.0 Type A
  2. USB 3.0 Type C
  3. SD card
  4. RTC
  5. M.2 connector (PCIe, USB, UART, I2C and I2S)
  6. JTAG
  • Supported OS :
  1. Yocto
  2. FreeRTOS
  3. Android
  • Power supply: 12V

Package Content

This is a description about the Nitrogen8m accessory kit and its contents. The packages includes the following items:

  • iMX8M Evaluation Kit Board preloaded with Android 8.1
  • 12v power adapter
  • USB type A to micro USB
  • USB type A to USB type C

 


[[IMX8/<Replace with "previous" page>|Previous: <Replace with "previous" page>]] Index [[IMX8/<Replace with "next" page>|Next: <Replace with "next" page>]]