2,225
edits
IMX8/iMX8MEVK/Getting Started/System Setup: Difference between revisions
IMX8/iMX8MEVK/Getting Started/System Setup (view source)
Revision as of 22:59, 9 November 2018
, 9 November 2018→Power up the board
No edit summary |
|||
| Line 32: | Line 32: | ||
[[File:IMX8M_Power_ON.JPG| center | 400px|thumb|i.MX8M EVK power switch set to ON]] | [[File:IMX8M_Power_ON.JPG| center | 400px|thumb|i.MX8M EVK power switch set to ON]] | ||
For the first boot, the i.MX8M EVK comes with a pre-built NXP Android binary demo flashed on the eMMC. If you set the boot switches to boot from EMMC ([[IMX8/iMX8MEVK/Getting_Started/Selecting_Boot_Options | Selecting Boot Mode]]) after power up, you should see the boot up information printed in the serial console and the Android logo appear on the HDMI display. | For the first boot, the i.MX8M EVK comes with a pre-built NXP Android binary demo flashed on the eMMC. If you set the boot switches to boot from EMMC (see [[IMX8/iMX8MEVK/Getting_Started/Selecting_Boot_Options |Selecting Boot Mode]]) after power up, you should see the boot up information printed in the serial console and the Android logo appear on the HDMI display. | ||
<noinclude>{{IMX8/Foot|<Replace with "previous" page>|<Replace with "next" page>}}</noinclude> | <noinclude>{{IMX8/Foot|<Replace with "previous" page>|<Replace with "next" page>}}</noinclude> | ||