Qualcomm Robotics RB5/Software Support/Debug modes/Set up board: Difference between revisions

Qualcomm Robotics RB5/Software Support/Debug modes/Set up board (view source)

219 bytes added , 6 April

no edit summary

2,599

edits

@@ Line 10: / Line 10: @@
 Qualcomm RB5 Board Recovery. Retrieved January 18, 2023, from [https://www.96boards.org/documentation/consumer/dragonboard/qualcomm-robotics-rb5/installation/board-recovery.md.html]</ref>. EDL Mode is used for recovering/flashing the board over USB.
-{{Ambox
+{{Colored box|background-title-color=#FF9333|title-color=#000000|title='''WARNING'''|icon=warning-icon-black.png
-|type=notice
+  |style=overflow:hidden;
-|small=left
+  |title='''WARNING'''
-|issue=Putting the device into EDL mode while it is powered or when USB is plugged in can cause damage to the board.
+  |content=Putting the device into EDL mode while it is powered or when USB is plugged in can cause damage to the board.
-|style=width:unset;
 }}
-{{Ambox
+{{Colored box|background-title-color=#6586B9|title-color=#FFFFFF|title='''Note'''|icon=notice-icon-white.png
-|type=notice
+  |style=overflow:hidden;
-|small=left
+  |title='''Note'''
-|issue=Please read every step before starting..
+  |content=Please read every step before starting.
-|style=width:unset;
+ }}
-}}
 '''1'''. Power off the board and unplug the USB type-C cable.