SDK Release for DM365 Leopard Board
- 1 General Information
- 2 Documentation
- 3 What's new?
- 4 Supported Operating Systems
- 5 SDK Details
- 6 Known Limitations and Defects
- 7 Support Information
- 8 SDK Download Instructions
- 9 Hardware usage examples
- 10 Related links
- Product Name: Evaluation SDK for DM365 Leopard Board.
- Date: 9-7-2010.
This document and the software described in it are furnished under license with RidgeRun, and as such, may be used or copied only in accordance with the terms of the license. The contents of this document are furnished for informational purposes only and are subject to change without notice. RidgeRun, assumes no responsibility or liability for any errors or inaccuracies that may exist in this document. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form, without the prior written consent of RidgeRun.
Please read the full license agreement for the RidgeRun Evaluation SDKs here.
ARM is a registered trademark of ARM Limited. Linux is a registered trademark of Linus Torvalds in the United States and other countries and is used by RidgeRun under license. Texas Instruments and TI are registered trademarks of Texas Instruments Incorporated. All other trademarks are the property of their respective owners.
|| Added support for Ubuntu 10.10|
Added support to the make update target
Improved network support
Fixed MT9P031 image orientation
Configured to use bigger CMEM pools
|2-12-2010||69||Fixed minor bug on the update script|
|| Added extra information when patches can't be removed cleanly and an extra check for modified kernel files before updating|
- DM365 Leopard Board related documentation:
- Updated kernel version to 2.6.32
- Updated DVSDK version to 3.10.00.19
- Updated GStreamer DMAI plugins
- Audio support added
- New driver for the 5MP camera sensor (improved frame rate, works with GStreamer...)
- Application to handle video capture previewer and resizer
- Support for component video output
- SD recovery support
Supported Operating Systems
Linux Distribution Ubuntu 9.04, 9.10, 10.04 and 10.10 in 32 bits.
This is an Evaluation Linux SDK build for Texas Instruments DM365 System on Chip.
This SDK is designed to run on the DM365 Leopard Board.
This SDK includes:
- ARM toolchain: gcc 4.2.4.
- U-Boot 1.3.4
- Linux kernel 2.6.32. DM365 support for the following drivers:
- Sensor MT9T031 for 5MP camera.
- Video output support: DVI, Component and Composite.
- MTD (NAND flash).
- Watchdog timer.
- Real time clock.
- USB (host and gadget).
- VPBE Framebuffer.
- Integration with TI's digital video toolkit for DaVinci platforms - DVSDK 3.10.00.19.
- Please make sure to download and install the DVSDK before building the RidgeRun SDK.
- Install the DVSDK by running dvsdk_3_10_00_19_Setup.bin. Be sure to use the default installation values.
- dvsdk_3_10_00_19_Setup.bin can be downloaded from TI's site.
Known Limitations and Defects
RidgeRun offers the evaluation SDK for hobbyists willing to invest time getting they project to work. RidgeRun also offers the evaluation SDK for professional companies in product development who want to try out the SDK before purchase. RidgeRun will extend the professional SDK as required by our customers. Many of those changes will be ported to the evaluation SDK.
Expect the list below to change regularly as new limitations are reported and defect fixes are checked in.
- Boot from NAND not supported. Use boot from SD card instead. (Boot from NAND is supported in the professional SDK).
- Composite output initialization must be done by the user when the board is booted.
- Video capture previewer and resizer need to be initialized by the user before a pipeline execution.
- HD video playback sometimes needs CMEM pools modification by the user.
- Only fixed frame rates for video capture are supported.
- Video display clocks are disabled when no camera sensor is detected.
- Out of order frames with the mt9p031 sensor.
This SDK doesn't include support services. Make sure to read the links listed below (Related Links) in order to solve some of the main issues.
RidgeRun Developer SDK for DM365 provides handful of debug and profile tools, professional Linux development support and a wider range of DM365 drivers. Contact RidgeRun at firstname.lastname@example.org for information and pricing on Developers SDK for DM365 platforms.
SDK Download Instructions
This SDK will be available to download through an SVN repository. To get the download link go to our download center and to the DM365 Leopardboard section. Once you register your data, a mail with the download information will be sent to you. Once you have the repository download link use
svn checkout <repositoryLink>
to download the SDK. In order to compile the SDK you need to install the toolchain (download link also provided within the email). Further instructions available at DM365-Leopard SDK Getting Started Guide.
Hardware usage examples
The next links will lead you to some hardware usage examples. It is important to follow the SDK installation instructions, since unexpected behavior can be obtained it these are not followed.